The floor inspection has been scheduled for 11am tomorrow. So for today’s post check out the blocking that was added to the floor today per engineering. This was the last thing needed to be done to the floor prior inspection, and this extra detail is called out by the engineer to help with sheer as the mods get delivered and set into position. Also, I took a picture of the waste left over from the floor framing. The drops from most of the engineered lumber can be used for blocking in the ceiling. What can’t be used and must be recycled fit into a trash can. I will also include a picture of the OSI Green Series sub floor adhesive. It has WAY less VOC’s (Volatile Organic Compounds) and chemicals than your normal sub floor glues while still maintaining a high bonding level. Note the FSC (Forest Stewardship Council) block that it is sitting on….some left over FSC framing material from our last project.
method homesfollow along as we build prefab homes
Archives
- February 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- May 2011
- April 2011
- March 2011
- December 2010
- November 2010
- October 2010
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- August 2009
- June 2009
- March 2009
- January 2009
- December 2008
- November 2008
- June 2008
- May 2008
- April 2008
- March 2008
Categories